News

 
 
  • 04 july 2017
    At the Technoprom Forum, an agreement was signed between "Tornado Modular Systems" with "Siblitmash" and "Komintern"

    The tripartite agreement provides for import substitution for components of the injection molding complex from SibLitMach in the field of industrial robots ("Comintern") and the control system ("Modular Tornado Systems") that will cover the entire production cycle of the LAP, including the management of industrial robots

All news
 
 

Back to the section

 


ADCS1 based on microprocessor protections of OJSC “Iskra NMP2

The main purpose of the system creation is collection of data about the state of the main electrical equipment of the electric power supply distribution objects of “Iskra” Federal Unitary Enterprise. The data collection should be carried out on the following electric power supply distribution objects:

  • RP-34;
  • TP-10B;
  • CRP-10 kV.

The terminals of the microprocessor protection of the “Schneider Electric” production are installed on each object in the corresponding cells:

  • Sepam 10A;
  • Sepam – S20;
  • Sepam – S40.

image002.gif

General description of the system

Automatic dispatch control system is an information and control system with implementation of the following functions:

  • Reading the current measurements (values of currents, voltages, active, reactive and full capacity, frequency) from protection terminals;
  • Reading the discrete signals of the switching equipment state (switches of the corresponding cells with installed protection terminals) from protection terminals;
  • Display of the protection terminals states;
  • Management of the switching equipment of the corresponding cells.

The system is automatized (not automatic), i.e. it assumes work of the automation equipment under control of dispatch staff. Two operator’s automated workstations (AWSs) are equipped for staff that perform monitoring of the system: operator’s AWS No. 1 located on the control unit No. 1 in the “ЭЦ” room and operator’s AWS No. 2 is located on the control unit No. 2 in the “В- 1быт” room.

The main instrument that allows performing all the necessary functions in the system is “Tornado INTEGRA” software, which is installed on the operator’s AWSs No. 1 and No. 2.

The main circuits of electric power distribution facilities with indication of the current measurements and the state of the main switching equipment are displayed in “Tornado INTEGRA” software.

In addition, automatic logging of events and the hierarchical navigation system of the object are provided in “Tornado INTEGRA” software.

The uninterruptible power supplies (UPSs) installed in the rooms of the control units on the consoles of the operator’s AWSs No. 1 and No. 2 are used to provide reliable power supply for the computers.

The power supply scheme of the computers and communication equipment is organized in accordance with the task of power supply, fulfilled by CJSC “Tornado Modular Systems” as part of the project for the creation of ADCS of OJSC “Iskra NMP”.

1 Automatic dispatched control system.

2 Novosibirsk mechanical plant.



 

 


Back to the section

A map of the projects executed by our company is displayed below.

You can also download the list of projects dated 1992-2017 [pdf, 328 Kb]


View Tornado modular Systems on a larger map

 

* 

*

*

*

*